Certificate EN 1090-1
CERTIFICATE
Conformity of the Factory Production Control
2627-CPR-1090-1.PL0351.TUVRh.22.00
In compliance with Regulation 305/2011/EU of the European Parliament and of the Council of 9 March 2011 (the Construction Products Regulation or CPR), this certificate applies to the following construction product:
Construction product:
Structural components and kits for aluminum structures to EXC2 according to EN 1090-3:2019
Intended use:
for load-bearing structures in all types of buildings
CE - marking method:
ZA.3.2 to ZA.3.4 acc. to EN 1090-1:2009+A1:2011
Manufacturer:
Copal Sp. z o.o., ul Sikorskiego 78, 64-980 Trzcianka Polska
Manufacturing plant (Production facility of the manufacturer):
ul Sikorskiego 78, 64-980 Trzcianka Polska
Confirmation:
This certificate attests that all provisions concerning the assessment and verification of constancy of performance described in Annex ZA of the harmonised standard EN 1090-1:2009+A1:2011 under system 2+ are applied, and that the factory production control assessed to be in conformity with the applicable requirements.
12.09.2017
Next surveillance audit:
5.09.2025
Validity:
This certificate will remain valid as long as the test methods and/or the factory production control requirements included in the harmonised standard used to assess the performance of the declared characteristics do not change, and the product and the manufacturing conditions in the plant are not modified significantly.
Place and date of issue:
Zabrze, 21.09.2022 Leszek Zadroga
Certificate number:
2627-CPR-1090-1.PL0351.TUVRh.22.00
Range of production:
Production, Mechanically connecting, Cutting, holing, forming, Welding
Remarks:
The Notified Body - 2627 TuV Rheinland Polska Sp. z o.o. has performed the initial inspection of the/of manufacturing plant(s) and of the factory production control and performs the continuous surveillance, assessment and approval of the factory production control.
General provisions:
The conditions of the standard EN 1090-1:2009+A1:2011, from section B. 4.1 until including section B. 4.4, must be fulfilled. The requirements of EN 1090-1:2009 + A1: 2011, section B. 4.3 are observed. These refer to the annual statements to be submitted in writing of the manufacturer to the Notified Body. The certificate was issued on the basis of the certification conditions availible on the www.tuv.pl/zalaczniki